Once you have calculated your Taper Per Foot, Head over to our FAQ page and utilize our custom product selector tool to get your correct reamer!

You can utilize either a caliper or micrometer to measure the dimensions you need to achieve. As the old saying goes, you get out what you put in. An accurate measurement of the stud you have gives you the greatest accuracy for the reamer you need!

The original hole was designed as a tapered hole to achieve the greatest strength while maintaining the ability to repair the hole when issues occur. Straight walled bushings are not the fix to worn holes. Tapered reamers are the only way to repair your worn hole or adapt the correct size taper for your stud to achieve proper repair.